|
There are no translations available.
30-120 kVA
Three-phase/Three-phase
The Master FC400 series static frequency converters are available from 30 to 120kVA, with a 50 or 60Hz input and a 400Hz output. The product of extended experience acquired in the UPS industry, the MP FC 400 series is distinguished by the use of technologically advanced components and for excellent reliability, ease of maintenance and easy of operation.
The Master FC400 series uses double conversion technology (VFI SS 111 voltage and frequency independent compliant with IEC EN 62040-3) with an output transformer inside in order to ensure the isolation of the load from network disturbances in all conditions. The output voltage is 208Vca three-phase (200/115V versions upon request). Thanks to high frequency, digitally controlled IGBT technology, the Master FC400 static converters are ideal for airport, military and naval applications.
Minimum impact on network – easy source
Master FC400 was designed to reduce to a minimum the impact on the network or a generator located upstream, thanks to the low harmonic content input and the progressive start of the rectifiers.These features make the frequency converters of the Master FC400 especially compatible with generators.
Ease of Installation and Maintenance
Master FC400 only requires a small space for installation (only 0.86m2 for 120kVA). Ordinary and extraordinary maintenance operations are facilitated by frontal access to the main subsets of the frequency converter. The fans in the upper part of the UPS allow for its placement against the wall, eliminating side and rear access.
Applications
Master Plus FC provides additional protection for a wide range of applications, including:
• Powering planes in airports
• Radar and flight-control systems
• Naval applications
• Military applications
• Power for test benches
Options
• Input isolation transformer
• 2 Programmable relay contact boards
• Remote LCD mimic panel
• Remote Graphic Panel
• Higher protection level than IP20
• Parallel.
Download
|
