The panel are metal-enclosed, free-standing compartmentalized, modular type suitable for indoor and outdoor installation. Its board are fabricated out of adequate thickness mild steel Structural Sections. The frames shall be enclosed with cold rolled steel of not less than 2.0 mm thickness. Each table chamber has cable entry from Top to Bottom with suitable removable gland plates. The cable chamber is provided with suitable supporting arrangement between the gland plate and terminals. All covers, doors and Joints are gasketted using neoprene gaskets.
Control Panels, also known as power control centers (PCC) are generally used with integrated temperature controls and over temperature controls. These panels are used for variety of applications and are available in many different specifications.
Development in modern technology have led to a significant increase in the number of thyristor, D.C. Drives. & converter fed loads. Unfortunately the said equipment's have undesirable Effects on the incoming AC supply, drawing appreciable inductive reactive power & a non-sine-wave current, The Standard range MPP Capacitors are designed for systems where harmonics are not present.
Auto mains failure panels, also known as AMF panels, are used to automatically changeover from mains electricity supply to stand-by generator or genset on failure of the mains supply. When the mains supply is restored, the system automatically changes back and stops the genset. The stand-by generator will be eventually shut down after a short cooling down period.
Synchronization panels are mainly designed and used to meet power system requirements. These panels provide manual as well as automatic synchronizing function for one or more generator breakers. They are widely used in synchronizing generators and offering multiplexing solutions.
Power distribution panels are primarily used to distribute direct current or DC power from one supply to other devices. These type of distribution panels
Power distribution panels are primarily used to distribute direct current or DC power from one supply to other devices. These type of distribution panels monitor and safeguard DC systems and serve as an effective power distribution system. These components divide an electrical power feed into various subsidiary circuits and also provide a protective fuse or circuit breaker for each circuit, in a common enclosure.
